Inverters remain India’s most used alternative electricity source. They are easy to install and works for almost all appliances installed in your home or office. In some cases, the inverter acts as a backup for air conditioning needs. However, one should not miss that a battery is an integral part of a power backup system. Not only does it store the power, but it also helps with the upkeeping of the inverter’s functions.
You would want the batteries to last long and for several years, just like many other appliances. To accomplish this, you can either employ a trustworthy technician or try these easy tips at home. Try out these tips for inverter battery to ensure good performance.
Inverter Battery Maintenance Tips
- You must install your inverter and battery in a well-ventilated area. It is needed because the inverter battery gets warmed up during charging and operation. An airy position decreases the risk of heating the battery.
- Ensure that the water level is always maintained. However, one thing that should be kept in mind is that only distilled water should be used for refiling purpose, boiled water or rainwater should not be used.
- Using your battery daily is critical. When your deep cycle inverter battery is being used to power a mechanism, it is important to control the charge and not accidentally find yourself without power. Depending on the manufacturer, deep-cycle batteries tend to discharge 45-75 percent of their power.
Also see: Best Inverter Bulbs
So how to test the charge of the battery?
There are many good tools to help you out, such as voltage indicating digital monitors and amp-hour meters. Use one of these tools to verify your deep-cycle battery’s current charge. If they mention a 50 percent charge, they should be recharged. Never let it get lower than 20 percent to ensure long battery life.
- Secure your sulfate-free inverter battery. When left uncharged for too long, lead-acid batteries, such as deep-cycle batteries, run the sulfation risk. As the lead sulfates crystallize, sulfation occurs, and your battery will no longer accept a charge. It is too late to save the inverter battery if this happens.
After a discharge cycle, recharge your deep-cycle battery completely to avoid the possibility of sulfation. To keep your battery safe, make sure that you have periodic charge cycles. The ultimate defense against sulphation is avoidance.
- Keep the battery terminals rust free. Pour a solution containing hot water and baking soda on the corrosive region or use a toothbrush for cleaning if the terminals get corroded.
To prevent potential corrosion, add petroleum jelly or Vaseline to the terminals, nuts, and bolts. For battery output, rusting of terminals is not good as it decreases the flow of current to and from the battery. This results in slow charging of the battery and reduced life span.
- Keep the battery’s surface and sides clean and dust-free. Clean these surfaces using cotton fabric.
- Regularly check that the vents around the battery are open and dust-free. Blocked vents contribute to the accumulation of hydrogen gas, which can lead to the battery bursting.
- Place the inverter at safe locations in your home that are out of children’s reach. Make sure it is airy and well ventilated at the same time.
- If it is dead or fried, replace your battery. A regular inspection will keep you updated about the conditions of your inverter and battery.
These inverter battery maintenance tips will help you with the upkeep of your power backup solution. You can check out trusted brands like Luminous and get your hands on the best inverter and battery for your home.